Jobec UK Ltd – Our Services

  • Rotational Moulding

    Jobec UK Ltd can rotationally mould items up to 3 metres long by 1.5m wide by 1.5m deep, and process most commercially available materials in a vast range of colours and finishes.

    For example – Standard Polyethylene, Cross-linked Polyethylene, Polypropylene, Polyvinyl Chloride, Nylon/Polyamides and Foamed Polymers.

    A wide variety of surface finishes can be achieved either with the carful selection of polymer or in mould texture.

    Almost any colour is achievable, including Fluorescent, Metallic, Sparkle, Granite, Antique, Cast iron and Pewter, Stone, Terracotta, etc.

    Using a suitable grade of polymer, properties can be achieved such as – Fuel safe, UV protection, Anti-bacterial, Foamed insulation and Flame retardancy.

    Mouldings normally have an even wall thickness throughout, but by carefully manipulation during the moulding process, material can be added or reduced in certain areas for best effect.

    Captive nuts, studs and other fittings can be moulded in place during process if needed.

    We also offer post-mould assembly and packaging services for customer products and can dispatch direct to end users if required.

    Many varied items can be manufactured quite easily by ourselves, items such as:

    Water troughs, Cattle and sheep feeders, Spray tanks, Bulk fuel tanks, Bulk water tanks, Mudguards, Furniture, Baths & Spa's, Bins & Planters, Point of sale displays, Road Barriers, Traffic Cones, Safety sign, Buoy's, Life rings, Pontoon Floats, Kayak canoes, Horse, Jumps, Boats, Waste bins, Bottle Banks, Sinks, Portable toilets, Urinals, Doors & Frames and Roof boxes etc.

    The list of items that can be rotationally moulded is almost endless.

    Rotational mould machine Birmingham

    Jobec UK Ltd - 110v warm handwash unit 2
  • Tooling

    Machining rotational moulding casting Jobec UK Ltd West Midlands

    Rotational moulding tool Jobec UK Ltd Warwickshire

    Tooling costs are very economic when compared to other plastic molding processes.

    They can be manufactured from steel sheet or aluminium, either cast or fabricated.

    The tools can be very cost-effective when compared to other forms of plastic moulding and generally have a long-life expectancy.

    Heavy-duty joint clamps hold the tool shell together, to enclose the plastic powder during the moulding process.
    On cast tools, the jointing faces are usually machined to ensure an accurate, close, joint line.

    Rotational moulding tool Jobec UK Ltd - Staffordshire

    Rotational moulding tool Jobec UK Ltd Devon
     

  • Assembly

    We provide post-mould trimming, fabrication, flame treating, assembly, electrical testing and packaging services for customer products and can direct dispatch to end users as required.

    Fittings such as threaded inserts, studs, pipes, decals etc can also be moulded in during process

    Trimming Birmingham Rotational Mouldings Jobec UK Pty

    Kent Hand Wash Stand Assembly Jobec UK Ltd

    Warm hand wash unit assembly Jobec UK Ltd Newcastle

    roto-moulded-Sheffield-hand-sink-Jobec-uk-Ltd

Let us form the success of your business – 01922 649 961

Jobec UK Ltd can deliver internationally and nationwide. We can also provide delivery using our own transport service to the following areas: West Midlands, Birmingham, Coventry, Wolverhampton, Staffordshire, Warwickshire, Leicestershire, Worcestershire and Derbyshire.